diff options
Diffstat (limited to 'install.sh')
| -rwxr-xr-x | install.sh | 399 |
1 files changed, 222 insertions, 177 deletions
@@ -66,9 +66,9 @@ prompt_user() { echo case "${response^^}" in - Y) return 0 ;; - N) return 1 ;; - *) handle_error "Invalid choice. Exiting..." && exit ;; + Y) return 0 ;; + N) return 1 ;; + *) handle_error "Invalid choice. Exiting..." && exit ;; esac } @@ -91,9 +91,9 @@ check_privilege_tools() { printf "\nAttempt to continue Installation (might fail without a privilege escalation tool)? [yes/no] " read continue_choice case $continue_choice in - [Yy] | [Yy][Ee][Ss]) ;; - [Nn] | [Nn][Oo]) exit ;; - *) handle_error "Invalid choice. Exiting..." && exit ;; + [Yy] | [Yy][Ee][Ss]) ;; + [Nn] | [Nn][Oo]) exit ;; + *) handle_error "Invalid choice. Exiting..." && exit ;; esac fi } @@ -152,9 +152,9 @@ std_err_output=$(config checkout 2>&1 >/dev/null) || true if [[ $std_err_output == *"following untracked working tree files would be overwritten"* ]]; then echo "Backing up pre-existing dot files." config checkout 2>&1 | - egrep "\s+\." | - awk {'print $1'} | - xargs -I% sh -c "mkdir -p '.cfg-backup/%'; mv % .cfg-backup/%" + egrep "\s+\." | + awk {'print $1'} | + xargs -I% sh -c "mkdir -p '.cfg-backup/%'; mv % .cfg-backup/%" fi # Prompt the user if they want to overwrite existing files @@ -236,34 +236,34 @@ _distro_detect() { if [ -f /etc/os-release ]; then source /etc/os-release case "$ID" in - "arch") - _distro="PACMAN" - return - ;; - "debian") - _distro="DPKG" - return - ;; - "ubuntu") - _distro="DPKG" - return - ;; - "centos") - _distro="YUM" - return - ;; - "fedora") - _distro="YUM" - return - ;; - "opensuse" | "suse") - _distro="ZYPPER" - return - ;; - "gentoo") - _distro="PORTAGE" - return - ;; + "arch") + _distro="PACMAN" + return + ;; + "debian") + _distro="DPKG" + return + ;; + "ubuntu") + _distro="DPKG" + return + ;; + "centos") + _distro="YUM" + return + ;; + "fedora") + _distro="YUM" + return + ;; + "opensuse" | "suse") + _distro="ZYPPER" + return + ;; + "gentoo") + _distro="PORTAGE" + return + ;; esac fi @@ -421,126 +421,161 @@ done # Update system linux_update_system() { case "$_distro" in - "PACMAN") - "$PRIVILEGE_TOOL" pacman -Syyy && "$PRIVILEGE_TOOL" pacman -Syu --noconfirm - ;; - "DPKG") - "$PRIVILEGE_TOOL" apt-get update && "$PRIVILEGE_TOOL" apt-get upgrade -y - ;; - "YUM") - "$PRIVILEGE_TOOL" yum update -y - ;; - "ZYPPER") - "$PRIVILEGE_TOOL" zypper --non-interactive update - ;; - "PORTAGE") - "$PRIVILEGE_TOOL" emerge --sync && "$PRIVILEGE_TOOL" emerge --ask --update --deep --newuse @world - ;; - *) - echo "Package manager not supported." - ;; + "PACMAN") + "$PRIVILEGE_TOOL" pacman -Syyy && "$PRIVILEGE_TOOL" pacman -Syu --noconfirm + ;; + "DPKG") + "$PRIVILEGE_TOOL" apt-get update && "$PRIVILEGE_TOOL" apt-get upgrade -y + ;; + "YUM") + "$PRIVILEGE_TOOL" yum update -y + ;; + "ZYPPER") + "$PRIVILEGE_TOOL" zypper --non-interactive update + ;; + "PORTAGE") + "$PRIVILEGE_TOOL" emerge --sync && "$PRIVILEGE_TOOL" emerge --ask --update --deep --newuse @world + ;; + *) + echo "Package manager not supported." + ;; esac } #------------------------------------------------------------------------------ -# Install packages linux_install_packages() { local failed_packages=() + local any_failures=false # Flag to track if any packages failed to install # Read the package manager type detected by _distro_detect() case "$_distro" in - "PACMAN") - function install_yay { - if [[ -x $(command -v yay) ]]; then - return - fi - git clone https://aur.archlinux.org/yay.git - cd yay - makepkg -si - cd .. - rm -rf yay - } - install_yay - - # Installation using Pacman - while IFS= read -r package; do - if ! pacman -Q "$package" &>/dev/null; then - if ! "$PRIVILEGE_TOOL" pacman -S --noconfirm "$package"; then - failed_packages+=("$package") + "PACMAN") + function install_yay { + if [[ -x $(command -v yay) ]]; then + return + fi + git clone https://aur.archlinux.org/yay.git + cd yay || exit + makepkg -si + cd .. + rm -rf yay + } + install_yay + + # Installation using Pacman + while IFS= read -r package; do + # Skip empty lines + if [[ -z "$package" ]]; then + continue fi - fi - done <packages.txt - - if [ ${#failed_packages[@]} -gt 0 ]; then - echo "Failed to install the following packages:" - printf '%s\n' "${failed_packages[@]}" - # Install failed AUR packages using yay - for package in "${failed_packages[@]}"; do - if ! yay -Q "$package" &>/dev/null; then - if ! yay --aur -S --noconfirm "$package"; then - echo "Failed to install $package using yay." + if ! pacman -Q "$package" &>/dev/null; then + if ! "$PRIVILEGE_TOOL" pacman -S --noconfirm "$package"; then + failed_packages+=("$package") + any_failures=true # Set flag to true if any package fails to install fi fi - done - else - echo "" - fi - ;; - "DPKG") - # Try installing packages with dpkg - while IFS= read -r package; do - if ! dpkg-query -W "$package" &>/dev/null; then - if ! "$PRIVILEGE_TOOL" apt-get install -y "$package"; then - failed_packages+=("$package") + done <packages.txt + + if [[ "$any_failures" = "true" ]]; then + echo "Failed to install the following packages:" + for package in "${failed_packages[@]}"; do + if ! pacman -Q "$package" &>/dev/null && ! yay -Q "$package" &>/dev/null; then + if [[ -x "$(command -v yay)" ]]; then + echo "Trying to install $package from AUR using yay..." + if yay -S --noconfirm "$package"; then + echo "Successfully installed $package from AUR." + else + echo "Failed to install $package from AUR." + fi + else + echo "Failed to install $package using the default package manager." + fi + fi + done + else + echo "All packages installed successfully." + fi + ;; + "DPKG") + # Try installing packages with dpkg + while IFS= read -r package; do + if ! dpkg-query -W "$package" &>/dev/null; then + if ! "$PRIVILEGE_TOOL" apt-get install -y "$package"; then + failed_packages+=("$package") + any_failures=true # Set flag to true if any package fails to install + fi fi + done <packages.txt + + if "$any_failures"; then + echo "Failed to install the following packages:" + printf '%s\n' "${failed_packages[@]}" + else + echo "All packages installed successfully." fi - done <packages.txt - ;; - "YUM") - # Try installing packages with yum - while IFS= read -r package; do - if ! rpm -q "$package" &>/dev/null; then - if ! "$PRIVILEGE_TOOL" yum install -y "$package"; then - failed_packages+=("$package") + ;; + "YUM") + # Try installing packages with yum + while IFS= read -r package; do + if ! rpm -q "$package" &>/dev/null; then + if ! "$PRIVILEGE_TOOL" yum install -y "$package"; then + failed_packages+=("$package") + any_failures=true # Set flag to true if any package fails to install + fi fi + done <packages.txt + + if "$any_failures"; then + echo "Failed to install the following packages:" + printf '%s\n' "${failed_packages[@]}" + else + echo "All packages installed successfully." fi - done <packages.txt - ;; - "ZYPPER") - # Try installing packages with zypper - while IFS= read -r package; do - if ! rpm -q "$package" &>/dev/null; then - if ! "$PRIVILEGE_TOOL" zypper --non-interactive install "$package"; then - failed_packages+=("$package") + ;; + "ZYPPER") + # Try installing packages with zypper + while IFS= read -r package; do + if ! rpm -q "$package" &>/dev/null; then + if ! "$PRIVILEGE_TOOL" zypper --non-interactive install "$package"; then + failed_packages+=("$package") + any_failures=true # Set flag to true if any package fails to install + fi fi + done <packages.txt + + if "$any_failures"; then + echo "Failed to install the following packages:" + printf '%s\n' "${failed_packages[@]}" + else + echo "All packages installed successfully." fi - done <packages.txt - ;; - "PORTAGE") - # Try installing packages with emerge - while IFS= read -r package; do - if ! equery list "$package" &>/dev/null; then - if ! "$PRIVILEGE_TOOL" emerge --ask "$package"; then - failed_packages+=("$package") + ;; + "PORTAGE") + # Try installing packages with emerge + while IFS= read -r package; do + if ! equery list "$package" &>/dev/null; then + if ! "$PRIVILEGE_TOOL" emerge --ask "$package"; then + failed_packages+=("$package") + any_failures=true # Set flag to true if any package fails to install + fi fi + done <packages.txt + + if "$any_failures"; then + echo "Failed to install the following packages:" + printf '%s\n' "${failed_packages[@]}" + else + echo "All packages installed successfully." fi - done <packages.txt - ;; - *) - echo "Package manager not supported." - ;; + ;; + *) + echo "Package manager not supported." + ;; esac - - # Print failed packages if any - if [ ${#failed_packages[@]} -gt 0 ]; then - echo "Failed to install the following packages:" - printf '%s\n' "${failed_packages[@]}" - else - echo "All packages installed successfully." - fi } + # Install Rust using rustup install_rust() { if command -v "rustup" &>/dev/null; then @@ -560,21 +595,21 @@ install_nvm() { if [ ! -d "$NVM_DIR" ]; then mkdir -p "$NVM_DIR" fi - echo "Installing Node Version Manager (NVM)..." - - # Download and install NVM script - if ! command -v nvm &>/dev/null; then - curl -o- https://raw.githubusercontent.com/nvm-sh/nvm/v0.39.1/install.sh | bash + # Download and install or update NVM script + if command -v nvm &>/dev/null; then + echo "Updating Node Version Manager (NVM)..." + curl -o- https://raw.githubusercontent.com/nvm-sh/nvm/master/install.sh | bash else - echo "NVM is already installed." + echo "Installing Node Version Manager (NVM)..." + curl -o- https://raw.githubusercontent.com/nvm-sh/nvm/master/install.sh | bash fi - # Source NVM script to enable it in the current shell if [ -s "$NVM_DIR/nvm.sh" ]; then echo "Sourcing NVM script..." . "$NVM_DIR/nvm.sh" else echo "NVM script not found. Make sure installation was successful." + return 1 fi # Verify installation @@ -585,28 +620,28 @@ install_nvm() { [ -s "$NVM_DIR/bash_completion" ] && \. "$NVM_DIR/bash_completion" # This loads nvm bash_completion else echo "NVM installation failed." + return 1 fi } install_node() { # Check if Node.js is already installed - node -v &>/dev/null - if [ $? == "0" ]; then + if ! command -v node &>/dev/null; then echo "Node.js is already installed." - else - echo "Installing Node.js..." - # Set up environment variables for Node.js installation - export NVM_NODEJS_ORG_MIRROR=https://npm.taobao.org/mirrors/node/ - export NODEJS_ORG_MIRROR=https://npm.taobao.org/mirrors/node/ - - # Install the latest stable version of Node.js using NVM - #nvm install stable - #nvm use stable - #nvm alias default stable - nvm install --lts - nvm install node - echo "Node.js installation completed successfully." + return fi + + echo "Installing Node.js..." + # Set up environment variables for Node.js installation + export NVM_NODEJS_ORG_MIRROR=https://npm.taobao.org/mirrors/node/ + export NODEJS_ORG_MIRROR=https://npm.taobao.org/mirrors/node/ + + # Install the latest stable version of Node.js using NVM + nvm install node + nvm install --lts + nvm alias default lts/* # Set LTS version as default + + echo "Node.js installation completed successfully." } install_yarn() { @@ -614,22 +649,32 @@ install_yarn() { if command -v yarn &>/dev/null; then echo "Yarn is already installed." return - else - echo "Installing Yarn..." - # Install Yarn using npm - curl -o- -L https://yarnpkg.com/install.sh | bash - echo "Yarn installation completed successfully." fi + + # Check if the .yarn directory exists + if [ -d "$HOME/.yarn" ]; then + echo "Removing existing .yarn directory..." + rm -rf "$HOME/.yarn" + fi + + echo "Installing Yarn..." + # Install Yarn using npm + curl -o- -L https://yarnpkg.com/install.sh | bash + echo "Yarn installation completed successfully." } setup_tmux_plugins() { - if [ "$(ls -A "$DIR")" ]; then - # if we have TPM already we skip it. + local tpm_dir="$DIR/.tmux/plugins/tpm" + if [ -d "$tpm_dir" ] && [ "$(ls -A "$tpm_dir")" ]; then + # TPM is already installed and directory is not empty, so we skip installation. echo "TPM has been installed...skipping" else - # if we don't have TPM we install it. - echo "TPM has been installed" - git clone https://github.com/tmux-plugins/tpm ~/.tmux/plugins/tpm + # If TPM directory doesn't exist or is empty, we proceed with installation. + if [ -d "$tpm_dir" ]; then + rmdir "$tpm_dir" + fi + echo "Installing TPM..." + cd && git clone https://github.com/tmux-plugins/tpm "$tpm_dir" fi } @@ -703,18 +748,18 @@ main_installation() { echo "Starting main installation..." case "$OSTYPE" in - linux-gnu*) - linux_specific_steps - ;; - darwin*) - macos_specific_steps - ;; - msys* | cygwin*) - windows_specific_steps - ;; - *) - handle_error "Unsupported operating system." - ;; + linux-gnu*) + linux_specific_steps + ;; + darwin*) + macos_specific_steps + ;; + msys* | cygwin*) + windows_specific_steps + ;; + *) + handle_error "Unsupported operating system." + ;; esac sleep 1 |