diff options
Diffstat (limited to 'install.sh')
| -rwxr-xr-x | install.sh | 443 |
1 files changed, 225 insertions, 218 deletions
@@ -67,9 +67,9 @@ prompt_user() { echo case "${response^^}" in - Y) return 0 ;; - N) return 1 ;; - *) handle_error "Invalid choice. Exiting..." && exit ;; + Y) return 0 ;; + N) return 1 ;; + *) handle_error "Invalid choice. Exiting..." && exit ;; esac } @@ -87,45 +87,45 @@ function _spinner() { local nc="\e[0m" case $1 in - start) - # calculate the column where spinner and status msg will be displayed - let column="$(tput cols)-${#2}"-8 - # display message and position the cursor in $column column - echo -ne "${2}" - printf "%${column}s" - - # start spinner - i=1 - sp="\\|/-" - delay=${SPINNER_DELAY:-0.15} - - while :; do - i=$((i + 1)) - printf "\b${sp:${i}%${#sp}:1}" - sleep "$delay" - done - ;; - stop) - if [[ -z ${3} ]]; then - echo "spinner is not running.." - exit 1 - fi + start) + # calculate the column where spinner and status msg will be displayed + let column="$(tput cols)-${#2}"-8 + # display message and position the cursor in $column column + echo -ne "${2}" + printf "%${column}s" + + # start spinner + i=1 + sp="\\|/-" + delay=${SPINNER_DELAY:-0.15} + + while :; do + i=$((i + 1)) + printf "\b${sp:${i}%${#sp}:1}" + sleep "$delay" + done + ;; + stop) + if [[ -z ${3} ]]; then + echo "spinner is not running.." + exit 1 + fi - kill "$3" >/dev/null 2>&1 + kill "$3" >/dev/null 2>&1 - # inform the user uppon success or failure - echo -en "\b[" - if [[ $2 -eq 0 ]]; then - echo -en "${green}${on_success}${nc}" - else - echo -en "${red}${on_fail}${nc}" - fi - echo -e "]" - ;; - *) - echo "invalid argument, try {start/stop}" - exit 1 - ;; + # inform the user uppon success or failure + echo -en "\b[" + if [[ $2 -eq 0 ]]; then + echo -en "${green}${on_success}${nc}" + else + echo -en "${red}${on_fail}${nc}" + fi + echo -e "]" + ;; + *) + echo "invalid argument, try {start/stop}" + exit 1 + ;; esac } @@ -186,9 +186,9 @@ check_privilege_tools() { printf "\nAttempt to continue Installation (might fail without a privilege escalation tool)? [yes/no] " read continue_choice case $continue_choice in - [Yy] | [Yy][Ee][Ss]) ;; - [Nn] | [Nn][Oo]) exit ;; - *) handle_error "Invalid choice. Exiting..." && exit ;; + [Yy] | [Yy][Ee][Ss]) ;; + [Nn] | [Nn][Oo]) exit ;; + *) handle_error "Invalid choice. Exiting..." && exit ;; esac fi } @@ -243,7 +243,6 @@ install_zsh_plugins() { #====================================== echo "$dotfiles_dir" >>.gitignore echo "install.sh" >>.gitignore - # Dotfiles function config { git --git-dir="$dotfiles_dir"/ --work-tree="$HOME" "$@" @@ -253,9 +252,11 @@ function config { if [ -d "$dotfiles_dir" ]; then echo "$dotfiles_dir directory already exists. Updating repository..." config pull + update=true else echo "Cloning dotfiles repository..." git clone --bare "$dotfiles_url" "$dotfiles_dir" + update=false fi # Function to install dotfiles @@ -263,15 +264,21 @@ install_dotfiles() { std_err_output=$(config checkout 2>&1 >/dev/null) || true if [[ $std_err_output == *"following untracked working tree files would be overwritten"* ]]; then - echo "Backing up pre-existing dotfiles." - config checkout 2>&1 | - grep -E "\s+\." | - awk '{print $1}' | - xargs -I% sh -c "mkdir -p '$dotfiles_dir-backup/$(dirname %)' && mv % '$dotfiles_dir-backup/%'" + echo "Backing up pre-existing dotfiles..." + mkdir -p "$dotfiles_dir-backup" + config status --porcelain | awk '{print $2}' | while read -r file; do + mkdir -p "$dotfiles_dir-backup/$(dirname "$file")" + mv "$file" "$dotfiles_dir-backup/$file" + done + + if [ "$update" = false ]; then + config checkout 2>&1 >/dev/null + fi fi config config status.showUntrackedFiles no - git config --global include.path "~/.gitconfig.aliases" + + git config --global include.path "$HOME.gitconfig.aliases" # Prompt the user if they want to overwrite existing files if prompt_user "Do you want to overwrite existing files and continue with the dotfiles setup?"; then @@ -351,34 +358,34 @@ _distro_detect() { if [ -f /etc/os-release ]; then source /etc/os-release case "$ID" in - "arch") - _distro="PACMAN" - return - ;; - "debian") - _distro="DPKG" - return - ;; - "ubuntu") - _distro="DPKG" - return - ;; - "centos") - _distro="YUM" - return - ;; - "fedora") - _distro="YUM" - return - ;; - "opensuse" | "suse") - _distro="ZYPPER" - return - ;; - "gentoo") - _distro="PORTAGE" - return - ;; + "arch") + _distro="PACMAN" + return + ;; + "debian") + _distro="DPKG" + return + ;; + "ubuntu") + _distro="DPKG" + return + ;; + "centos") + _distro="YUM" + return + ;; + "fedora") + _distro="YUM" + return + ;; + "opensuse" | "suse") + _distro="ZYPPER" + return + ;; + "gentoo") + _distro="PORTAGE" + return + ;; esac fi @@ -536,24 +543,24 @@ done # Update system linux_update_system() { case "$_distro" in - "PACMAN") - "$PRIVILEGE_TOOL" pacman -Syyy && "$PRIVILEGE_TOOL" pacman -Syu --noconfirm - ;; - "DPKG") - "$PRIVILEGE_TOOL" apt-get update && "$PRIVILEGE_TOOL" apt-get upgrade -y - ;; - "YUM") - "$PRIVILEGE_TOOL" yum update -y - ;; - "ZYPPER") - "$PRIVILEGE_TOOL" zypper --non-interactive update - ;; - "PORTAGE") - "$PRIVILEGE_TOOL" emerge --sync && "$PRIVILEGE_TOOL" emerge --ask --update --deep --newuse @world - ;; - *) - echo "Package manager not supported." - ;; + "PACMAN") + "$PRIVILEGE_TOOL" pacman -Syyy && "$PRIVILEGE_TOOL" pacman -Syu --noconfirm + ;; + "DPKG") + "$PRIVILEGE_TOOL" apt-get update && "$PRIVILEGE_TOOL" apt-get upgrade -y + ;; + "YUM") + "$PRIVILEGE_TOOL" yum update -y + ;; + "ZYPPER") + "$PRIVILEGE_TOOL" zypper --non-interactive update + ;; + "PORTAGE") + "$PRIVILEGE_TOOL" emerge --sync && "$PRIVILEGE_TOOL" emerge --ask --update --deep --newuse @world + ;; + *) + echo "Package manager not supported." + ;; esac } @@ -565,129 +572,129 @@ linux_install_packages() { # Read the package manager type detected by _distro_detect() case "$_distro" in - "PACMAN") - function install_yay { - if [[ -x $(command -v yay) ]]; then - return - fi - git clone https://aur.archlinux.org/yay.git - cd yay || exit - makepkg -si - cd .. - rm -rf yay - } - install_yay - - # Installation using Pacman - while IFS= read -r package; do - # Skip empty lines - if [[ -z "$package" ]]; then - continue - fi + "PACMAN") + function install_yay { + if [[ -x $(command -v yay) ]]; then + return + fi + git clone https://aur.archlinux.org/yay.git + cd yay || exit + makepkg -si + cd .. + rm -rf yay + } + install_yay - if ! pacman -Q "$package" &>/dev/null; then - if ! "$PRIVILEGE_TOOL" pacman -S --noconfirm "$package"; then - failed_packages+=("$package") - any_failures=true # Set flag to true if any package fails to install - fi + # Installation using Pacman + while IFS= read -r package; do + # Skip empty lines + if [[ -z "$package" ]]; then + continue + fi + + if ! pacman -Q "$package" &>/dev/null; then + if ! "$PRIVILEGE_TOOL" pacman -S --noconfirm "$package"; then + failed_packages+=("$package") + any_failures=true # Set flag to true if any package fails to install fi - done <packages.txt - - if [[ "$any_failures" = "true" ]]; then - echo "Failed to install the following packages:" - for package in "${failed_packages[@]}"; do - if ! pacman -Q "$package" &>/dev/null && ! yay -Q "$package" &>/dev/null; then - if [[ -x "$(command -v yay)" ]]; then - echo "Trying to install $package from AUR using yay..." - if yay -S --noconfirm "$package"; then - echo "Successfully installed $package from AUR." - else - echo "Failed to install $package from AUR." - fi + fi + done <packages.txt + + if [[ "$any_failures" = "true" ]]; then + echo "Failed to install the following packages:" + for package in "${failed_packages[@]}"; do + if ! pacman -Q "$package" &>/dev/null && ! yay -Q "$package" &>/dev/null; then + if [[ -x "$(command -v yay)" ]]; then + echo "Trying to install $package from AUR using yay..." + if yay -S --noconfirm "$package"; then + echo "Successfully installed $package from AUR." else - echo "Failed to install $package using the default package manager." + echo "Failed to install $package from AUR." fi - fi - done - else - echo "All packages installed successfully." - fi - ;; - "DPKG") - # Try installing packages with dpkg - while IFS= read -r package; do - if ! dpkg-query -W "$package" &>/dev/null; then - if ! "$PRIVILEGE_TOOL" apt-get install -y "$package"; then - failed_packages+=("$package") - any_failures=true # Set flag to true if any package fails to install + else + echo "Failed to install $package using the default package manager." fi fi - done <packages.txt - - if "$any_failures"; then - echo "Failed to install the following packages:" - printf '%s\n' "${failed_packages[@]}" - else - echo "All packages installed successfully." - fi - ;; - "YUM") - # Try installing packages with yum - while IFS= read -r package; do - if ! rpm -q "$package" &>/dev/null; then - if ! "$PRIVILEGE_TOOL" yum install -y "$package"; then - failed_packages+=("$package") - any_failures=true # Set flag to true if any package fails to install - fi + done + else + echo "All packages installed successfully." + fi + ;; + "DPKG") + # Try installing packages with dpkg + while IFS= read -r package; do + if ! dpkg-query -W "$package" &>/dev/null; then + if ! "$PRIVILEGE_TOOL" apt-get install -y "$package"; then + failed_packages+=("$package") + any_failures=true # Set flag to true if any package fails to install fi - done <packages.txt - - if "$any_failures"; then - echo "Failed to install the following packages:" - printf '%s\n' "${failed_packages[@]}" - else - echo "All packages installed successfully." fi - ;; - "ZYPPER") - # Try installing packages with zypper - while IFS= read -r package; do - if ! rpm -q "$package" &>/dev/null; then - if ! "$PRIVILEGE_TOOL" zypper --non-interactive install "$package"; then - failed_packages+=("$package") - any_failures=true # Set flag to true if any package fails to install - fi - fi - done <packages.txt + done <packages.txt - if "$any_failures"; then - echo "Failed to install the following packages:" - printf '%s\n' "${failed_packages[@]}" - else - echo "All packages installed successfully." + if "$any_failures"; then + echo "Failed to install the following packages:" + printf '%s\n' "${failed_packages[@]}" + else + echo "All packages installed successfully." + fi + ;; + "YUM") + # Try installing packages with yum + while IFS= read -r package; do + if ! rpm -q "$package" &>/dev/null; then + if ! "$PRIVILEGE_TOOL" yum install -y "$package"; then + failed_packages+=("$package") + any_failures=true # Set flag to true if any package fails to install + fi fi - ;; - "PORTAGE") - # Try installing packages with emerge - while IFS= read -r package; do - if ! equery list "$package" &>/dev/null; then - if ! "$PRIVILEGE_TOOL" emerge --ask "$package"; then - failed_packages+=("$package") - any_failures=true # Set flag to true if any package fails to install - fi + done <packages.txt + + if "$any_failures"; then + echo "Failed to install the following packages:" + printf '%s\n' "${failed_packages[@]}" + else + echo "All packages installed successfully." + fi + ;; + "ZYPPER") + # Try installing packages with zypper + while IFS= read -r package; do + if ! rpm -q "$package" &>/dev/null; then + if ! "$PRIVILEGE_TOOL" zypper --non-interactive install "$package"; then + failed_packages+=("$package") + any_failures=true # Set flag to true if any package fails to install fi - done <packages.txt + fi + done <packages.txt - if "$any_failures"; then - echo "Failed to install the following packages:" - printf '%s\n' "${failed_packages[@]}" - else - echo "All packages installed successfully." + if "$any_failures"; then + echo "Failed to install the following packages:" + printf '%s\n' "${failed_packages[@]}" + else + echo "All packages installed successfully." + fi + ;; + "PORTAGE") + # Try installing packages with emerge + while IFS= read -r package; do + if ! equery list "$package" &>/dev/null; then + if ! "$PRIVILEGE_TOOL" emerge --ask "$package"; then + failed_packages+=("$package") + any_failures=true # Set flag to true if any package fails to install + fi fi - ;; - *) - echo "Package manager not supported." - ;; + done <packages.txt + + if "$any_failures"; then + echo "Failed to install the following packages:" + printf '%s\n' "${failed_packages[@]}" + else + echo "All packages installed successfully." + fi + ;; + *) + echo "Package manager not supported." + ;; esac } @@ -877,18 +884,18 @@ main_installation() { echo "Starting main installation..." case "$OSTYPE" in - linux-gnu*) - linux_specific_steps - ;; - darwin*) - macos_specific_steps - ;; - msys* | cygwin*) - windows_specific_steps - ;; - *) - handle_error "Unsupported operating system." - ;; + linux-gnu*) + linux_specific_steps + ;; + darwin*) + macos_specific_steps + ;; + msys* | cygwin*) + windows_specific_steps + ;; + *) + handle_error "Unsupported operating system." + ;; esac sleep 1 |