diff options
Diffstat (limited to '.vim')
| -rw-r--r-- | .vim/vimrc | 428 |
1 files changed, 428 insertions, 0 deletions
diff --git a/.vim/vimrc b/.vim/vimrc new file mode 100644 index 0000000..a5dec2e --- /dev/null +++ b/.vim/vimrc @@ -0,0 +1,428 @@ + +"=============================================================================== +" Mappings/Keybindings/Commands +"=============================================================================== + +let mapleader = ";" " map leader to Semi colon +" Use <jk> to escape +inoremap jk <Esc> +" Easier split navigations, just ctrl-j instead of ctrl-w then j +nnoremap <C-J> <C-W><C-J> +nnoremap <C-K> <C-W><C-K> +nnoremap <C-L> <C-W><C-L> +nnoremap <C-H> <C-W><C-H> +" Combine buffers list with buffer name +nnoremap <Leader>b :buffers<CR>:buffer<Space> +" Map buffer next, prev and delete to <leader+(n/p/d)> +map <leader>n :bn<cr> +map <leader>p :bp<cr> +map <leader>d :bd<cr> +" Set alt + j/k to switch lines of texts or simply move them +:nnoremap <silent><A-k> :let save_a=@a<Cr><Up>"add"ap<Up>:let @a=save_a<Cr> +:nnoremap <silent><A-j> :let save_a=@a<Cr>"add"ap:let @a=save_a<Cr> +" Swap two pieces of text, use x to cut in visual mode, then use Ctrl-x in +" visual mode to select text to swap with +:vnoremap <C-X> <Esc>`.``gvP``P +" To resize in different steps, you can create maps that will adjust the window +" size differently. For example to increase the window size by a factor of 1.5 +" and decrease the window size by 0.67, you can map this: +"nnoremap <silent> <Leader>+ :exe "resize " . (winheight(0) * 3/2)<CR> +"nnoremap <silent> <Leader>- :exe "resize " . (winheight(0) * 2/3)<CR> +nnoremap <Leader>+ :resize +5<CR> +nnoremap <Leader>- :resize -5<CR> +nnoremap <Leader>> :vertical resize +5<CR> +nnoremap <Leader>< :vertical resize -5<CR> +" Toggle set number +nnoremap <leader>$ :NumbersToggle<CR> +"nnoremap <leader>% :NumbersOnOff<CR> +" Copy and Paste with <C-c> and <C-v> +"vmap <C-c> y:call system("xclip -i -selection clipboard", getreg("\""))<CR>:call system("xclip -i", getreg("\""))<CR> +"nmap <C-v> :call setreg("\"",system("xclip -o -selection clipboard"))<CR>p +nnoremap <expr> p (v:register == '"' && &clipboard =~ 'unnamed' ? '"*p' : '"' . v:register . 'p') +" Use command :Vb for Visual Block or <C-q> since <C-v> is used for Copy +command! Vb normal! <C-v> +" Map <w!!> to save/edit a root permission/read-only file, only works in +" traditional vim and not neovim +cmap w!! %!sudo tee > /dev/null +nnoremap <leader>x :silent !chmod +x %<CR> +"nnoremap <[-p> m`o<ESC>p`` +"nnoremap <]-p> m`O<ESC>p`` +" Paste on next line +"inoremap <C-CR> <C-R>" +set keywordprg=:help +runtime ftplugin/man.vim + + +"=============================================================================== +" Settings +"=============================================================================== + +"let g:nvim_system_wide = 1 " let whole system use nvim config +set shell=zsh +set termguicolors +set guicursor= +let &t_SI = "\e[6 q" +let &t_EI = "\e[2 q" + +" reset the cursor on start (for older versions of vim, usually not required) +augroup myCmds +au! +autocmd VimEnter * silent !echo -ne "\e[2 q" +augroup END +" Neovim requires xclip, check if normal vim has +clipboard by +" <:echo has('clipboard')> from within Vim (if the output is 1, good to +" go otherwise 0 then need a build that has it +" Next two commands make vim use X11 clipboard +set clipboard+=unnamedplus +let g:clipbrdDefaultReg = '+' +"let g:loaded_clipboard_provider = 1 +" <:e %:h/filename> will create a new file named filename in the same +" directory as the currently open file, and write it. +set autochdir " or use this to use <:e> to create a file in current directory +set splitright " make vsplit put the new buffer on the right of the current buffer +set splitbelow " make split put the new buffer below the current buffer +" :Bclose script (delete a buffer without closing the window) sourced as a +" plugin in ~/.config/nvim/plugin/bclose.vim | keymap: <leader>bd +let bclose_multiple = 1 +"set syntax +" Compute syntax highlighting from beginning of file. (By default, vim only +" looks 200 lines back, which can make it highlight code incorrectly in some +" long files.) +autocmd BufEnter * :syntax sync fromstart +" Don't syntax highlight markdown because it's often wrong +autocmd! FileType mkd setlocal syn=off +"set ttyfast +"set lazyredraw +set timeout timeoutlen=1000 ttimeoutlen=100 " fix slow O inserts +set scrolloff=8 sidescrolloff=8 +set tabstop=4 softtabstop=4 shiftwidth=4 expandtab +set autoindent +set smartindent +" Also load indent files, to automatically do language-dependent indenting. +filetype plugin indent on +set exrc +set number +set hidden +set noerrorbells +set nowrap +set ignorecase +set smartcase +set noswapfile +set nobackup +set incsearch +set cursorline +set showmatch +set showcmd +set incsearch +set hlsearch +set laststatus=2 +let g:python3_host_prog = '/usr/bin/python3' +"let g:loaded_python3_provider = 1 +let g:sh_noisk=1 +set modeline +set modelines=3 " modelines (comments that set vim options on a per-file basis) +set foldmethod=manual +set nofoldenable " turn folding off +" Insert only one space when joining lines that contain sentence-terminating +" punctuation like `.`. +set nojoinspaces +set autoread " if a file is changed outside of vim, automatically reload it without asking +set diffopt=vertical " diffs are shown side-by-side not above/below +set signcolumn=no " always show the sign column +set textwidth=80 +"------------------------------------------------------------------------------- + + +"=============================================================================== +" Plugins +"=============================================================================== + +" Auto-Install vim-plug +if empty(glob('~/.vim/autoload/plug.vim')) + silent !curl -fLo ~/.vim/autoload/plug.vim --create-dirs + \ https://raw.githubusercontent.com/junegunn/vim-plug/master/plug.vim + "autocmd VimEnter * PlugInstall + "autocmd VimEnter * PlugInstall | source $MYVIMRC +endif + +" :so % :PlugInstall +call plug#begin('~/.vim/autoload/plugged') +"Plug 'glepnir/dashboard-nvim' +Plug 'christoomey/vim-tmux-navigator' +Plug 'preservim/vimux' +Plug 'myusuf3/numbers.vim' +Plug 'romainl/vim-cool' +"Plug 'ervandew/supertab' +"Plug 'neoclide/coc.nvim', {'branch': 'release'} +Plug 'sheerun/vim-polyglot' +Plug 'vim-airline/vim-airline' +Plug 'ryanoasis/vim-devicons' +Plug 'rbgrouleff/bclose.vim' +"Plug 'ms-jpq/chadtree', {'branch': 'chad', 'do': 'python3 -m chadtree deps'} +Plug 'lambdalisue/fern.vim' +Plug 'junegunn/fzf', { 'do': { -> fzf#install() } } +Plug 'junegunn/fzf.vim' +Plug 'airblade/vim-rooter' +"Plug 'SirVer/ultisnips' +"Plug 'honza/vim-snippets' +Plug 'airblade/vim-gitgutter' +Plug 'tpope/vim-eunuch' +Plug 'tpope/vim-fugitive' +Plug 'tpope/vim-surround' +Plug 'tpope/vim-obsession' +Plug 'tpope/vim-unimpaired' +Plug 'scrooloose/syntastic' +Plug 'w0rp/ale' +Plug 'davidhalter/jedi-vim' +"Plug 'valloric/youcompleteme' " vim needs to be compiled with python/ compiled with install.py in plugin directory +Plug 'Lenovsky/nuake' +Plug 'voldikss/vim-floaterm' +Plug 'gruvbox-community/gruvbox' +Plug 'srcery-colors/srcery-vim' +Plug 'tomasr/molokai' +Plug 'ayu-theme/ayu-vim' +Plug 'sjl/badwolf' +Plug 'joshdick/onedark.vim' +call plug#end() + +"source $HOME/.vim/plug-config/coc.vim + +"------------------------------------------------------------------------------- + + +"=============================================================================== +" Plugin Settings +"=============================================================================== + +" Fugitive statusline +"--------------------------------------- +"set statusline=%{fugitive#statusline()}%F%m%r%h%w\ (%{&ff}){%Y}\ [%l,%v][%p%%] +"------------------------------------------------------------------------------- +"" Show the buffer number in the status line. +"set statusline=%02n:%<%f\ %h%m%r%=%-14.(%l,%c%V%)\ %P +"set statusline=%{fugitive#statusline()}02n:%<%f\ %h%m%r%=%-14.(%l,%c%V%)\ %P +"------------------------------------------------------------------------------- + +" Airline +"--------------------------------------- +let g:airline#extensions#tabline#enabled = 1 +let g:airline#extensions#tabline#show_buffers = 1 +let g:airline_powerline_fonts = 1 +let g:airline#extensions#tabline#buffer_nr_show = 1 +let g:airline_theme='onedark' +"------------------------------------------------------------------------------- + +" Float Term +"--------------------------------------- +" Configuration example +let g:floaterm_keymap_new = '<Leader>t' +let g:floaterm_keymap_prev = '<Leader>tn' +let g:floaterm_keymap_next = '<Leader>tp' +let g:floaterm_keymap_toggle = '<Leader>tt' +"------------------------------------------------------------------------------- + +" Nuake +"--------------------------------------- +" Toggle Nuake terminal panel +nnoremap <A-t> :Nuake<CR> +inoremap <A-t> <C-\><C-n>:Nuake<CR> +tnoremap <A-t> <C-\><C-n>:Nuake<CR> +let g:nuake_per_tab = 1 " Enable the Nuake instance per tab page. (default 1) +let g:close_if_last_standing = 1 " Close the editor if the Nuake window is the last one. (default 1) +let g:nuake_position = 'right' +"let g:nuake_size = 0.2 +"------------------------------------------------------------------------------- + +" Vimux +"--------------------------------------- +" Prompt for a command to run +map <Leader>vp :VimuxPromptCommand<CR> +" Run last command executed by VimuxRunCommand +map <Leader>vl :VimuxRunLastCommand<CR> +" Inspect runner pane +map <Leader>vi :VimuxInspectRunner<CR> +" Zoom the tmux runner pane +map<leader>vz :VimuxZoomRunner<CR> +"------------------------------------------------------------------------------- + +" Snippets +"--------------------------------------- +" Snippets — code snippets allow you to quickly write some boilerplate code +" that is often repetitive. To add code snippets support, you will have to add +" UltiSnips. +let g:UltiSnipsExpandTrigger = "<c-tab>" +"let g:UltiSnipsJumpForwardTrigger = "<tab>" +"let g:UltiSnipsJumpBackwardTrigger = "<s-tab>" +"------------------------------------------------------------------------------- + +" Youcompleteme +"--------------------------------------- +"let g:ycm_global_ycm_extra_conf = '~/.config/nvim/autoload/plugged/youcompleteme/.ycm_extra_conf.py' +" ---> compatibility with another plugin (ultisnips) <--- +"let g:ycm_key_list_select_completion = [ '<C-n>', '<Down>' ] +"let g:ycm_key_list_previous_completion = [ '<C-p>', '<Up>' ] +"let g:SuperTabDefaultCompletionType = '<C-n>' +" ---> disable preview window <--- +"set completeopt-=preview +" ---> navigating to the definition of a a symbol <--- +"map <leader>g :YcmCompleter GoToDefinitionElseDeclaration<CR> +"------------------------------------------------------------------------------- + + +"=============================================================================== +" File Manager & FZF +"=============================================================================== + +" CHADTree Filemanager/project drawer (NerdTree killer) +"--------------------------------------- +"" to toggle CHADTree run command :CHADopen or use hotkey <leader>v : +"nnoremap <leader>f <cmd>CHADopen<cr> +""nnoremap <leader>v <cmd>CHADopen<cr> " Default Behaviour +"nnoremap <A-f> <cmd>CHADopen<cr> +"" :CHADhelp to view documentation +"" Add a hotkey to clear quickfix list: +""nnoremap <leader>qk <cmd>call setqflist([])<cr> +"let g:chadtree_settings = { 'view.width': 25 } +"------------------------------------------------------------------------------- + +" FZF fuzzy finder +"--------------------------------------- +" Enable per-command history. +" CTRL-N and CTRL-P will be automatically bound to next-history and +" previous-history instead of down and up. If you don't like the change, +" explicitly bind the keys to down and up in your $FZF_DEFAULT_OPTS. +let g:fzf_history_dir = '~/.local/share/fzf-history' +map <leader>z :FZF<CR> +map <leader>a :Files<CR> +map <leader>l :Lines<CR> +map <leader>L :BLines<CR> +map <leader>B :Buffers<CR> +map <leader>h :History:<CR> +nnoremap <leader>g :Rg<CR> +"nnoremap <leader>t :Tags<CR> +nnoremap <leader>m :Marks<CR> +" This is the default extra key bindings +let g:fzf_action = { + \ 'ctrl-t': 'tab split', + \ 'ctrl-x': 'split', + \ 'ctrl-y': 'vsplit' } +let g:fzf_tags_command = 'ctags -R' +" Border color +let g:fzf_layout = {'up':'~90%', 'window': { 'width': 0.8, 'height': 0.8,'yoffset':0.5,'xoffset': 0.5, 'highlight': 'Todo', 'border': 'sharp' } } +let $FZF_DEFAULT_OPTS = '--layout=reverse --info=inline' +let $FZF_DEFAULT_COMMAND="rg --files --hidden" +" Customize fzf colors to match your color scheme +let g:fzf_colors = + \ { 'fg': ['fg', 'Normal'], + \ 'bg': ['bg', 'Normal'], + \ 'hl': ['fg', 'Comment'], + \ 'fg+': ['fg', 'CursorLine', 'CursorColumn', 'Normal'], + \ 'bg+': ['bg', 'CursorLine', 'CursorColumn'], + \ 'hl+': ['fg', 'Statement'], + \ 'info': ['fg', 'PreProc'], + \ 'border': ['fg', 'Ignore'], + \ 'prompt': ['fg', 'Conditional'], + \ 'pointer': ['fg', 'Exception'], + \ 'marker': ['fg', 'Keyword'], + \ 'spinner': ['fg', 'Label'], + \ 'header': ['fg', 'Comment'] } +" Get Files +command! -bang -nargs=? -complete=dir Files + \ call fzf#vim#files(<q-args>, fzf#vim#with_preview({'options': ['--layout=reverse', '--info=inline']}), <bang>0) +" Get text in files with Rg +command! -bang -nargs=* Rg + \ call fzf#vim#grep( + \ 'rg --column --line-number --no-heading --color=always --smart-case '.shellescape(<q-args>), 1, + \ fzf#vim#with_preview(), <bang>0) +" Ripgrep advanced +function! RipgrepFzf(query, fullscreen) + let command_fmt = 'rg --column --line-number --no-heading --color=always --smart-case %s || true' + let initial_command = printf(command_fmt, shellescape(a:query)) + let reload_command = printf(command_fmt, '{q}') + let spec = {'options': ['--phony', '--query', a:query, '--bind', 'change:reload:'.reload_command]} + call fzf#vim#grep(initial_command, 1, fzf#vim#with_preview(spec), a:fullscreen) +endfunction +command! -nargs=* -bang RG call RipgrepFzf(<q-args>, <bang>0) +" Git grep +command! -bang -nargs=* GGrep + \ call fzf#vim#grep( + \ 'git grep --line-number '.shellescape(<q-args>), 0, + \ fzf#vim#with_preview({'dir': systemlist('git rev-parse --show-toplevel')[0]}), <bang>0) +command! -bang FM call fzf#run(fzf#wrap({'source': 'cat ~/.fzf-marks | sed "s/.*: \(.*\)$/\1/" | sed "s#~#${HOME}#"', 'sink': 'lcd'}, <bang>0)) +"------------------------------------------------------------------------------- + + +"=============================================================================== +" Colorscheme +"=============================================================================== + +"colorscheme gruvbox +"colorscheme srcery +"colorscheme molokai +"colorscheme ayu +"let ayucolor="light" " for light version of theme +"let ayucolor="mirage" " for mirage version of theme +"let ayucolor="dark" " for dark version of theme +"colorscheme badwolf +"let g:badwolf_darkgutter = 0 " Make the gutters darker than the background. Default 0. +"let g:badwolf_tabline = 1 " 1 is default, 0 is lighter and 2 or 3 is darker a tabline + +" Try to use a colorscheme plugin +" but fallback to a default one +try + colorscheme gruvbox +catch /^Vim\%((\a\+)\)\=:E185/ + " no plugins available + colorscheme elflord +endtry +highlight Normal guibg=NONE +"set background=dark +"------------------------------------------------------------------------------- + + +"=============================================================================== +" Functions/Scripts +"=============================================================================== + +" Enable mouse scrollback +"--------------------------------------- +set mouse=a +tnoremap <Esc> <C-\><C-n> +tnoremap <c-b> <c-\><c-n> +function! ClearTerminal() + set scrollback=1 + let &g:scrollback=1 + echo &scrollback + call feedkeys("\i") + call feedkeys("clear\<CR>") + call feedkeys("\<C-\>\<C-n>") + call feedkeys("\i") + sleep 100m + let &scrollback=s:scroll_value +endfunction +"------------------------------------------------------------------------------- + +" :Rename {newname} +"--------------------------------------- +function! RenameFile() + let old_name = expand('%') + let new_name = input('New file name: ', expand('%'), 'file') + if new_name != '' && new_name != old_name + exec ':saveas ' . new_name + exec ':silent !rm ' . old_name + redraw! + endif +endfunction +map <leader>r :call RenameFile()<cr> +"------------------------------------------------------------------------------- + +" Return to the same line when we reopen a file +"--------------------------------------- + augroup line_return + au! + au BufReadPost * + \ if line("'\"") > 0 && line("'\"") <= line("$") | + \ execute 'normal! g`"zvzz' | + \ endif + augroup END +"------------------------------------------------------------------------------- |